Magic Lantern Firmware Wiki
(Added thanks)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
{{:Donate}}
 
 
'''THIS IS DANGEROUS AND MIGHT DAMAGE YOUR CAMERA.'''
 
'''THIS IS DANGEROUS AND MIGHT DAMAGE YOUR CAMERA.'''
'''NO WARRANTIES. NO GUARANTEES. DO NOT TAUNT.'''
+
'''NO WARRANTIES. NO GUARANTEES. DO NOT TAUNT.'''
 
'''IF IT BREAKS, YOU GET TO KEEP BOTH PIECES.'''
 
'''IF IT BREAKS, YOU GET TO KEEP BOTH PIECES.'''
   
'''Be careful using this for production work:''' Please test your camera and the firmware extensively before committing to using it on a set or any "one-take only" events. It has proven fairly stable in use, but there are still some rough edges.
+
'''Be careful using this for production work:''' Please test your camera and the firmware extensively before committing to using it on a set or any "one-take only" events. It has proven fairly stable in use, but there are still some rough edges.
   
'''Please review the [[FAQ]]'''. You have questions. It has answers.
+
'''Please review the [[FAQ]]'''. You have questions. It has answers.
   
  +
===[[Download firmware/5D Mark II|5D Mark II]]===
  +
===[[550D|550D / T2i / Kiss X4]]===
  +
===[[60D]]===
  +
=== [[600D|600D / T3i / Kiss X5]] ===
  +
===[[500D|500D / T1i / Kiss X3]]===
  +
Coming soon:
  +
* [[50D]] (1.0.8); no public release yet, but available as source code.
  +
* [[1100D]]/Rebel T3/Kiss X50 (1.0.4)
   
 
Good luck! And don't forget to read the [[FAQ]]
== General Instructions ==
 
* '''Very important:''' remove the battery after each test run. Sometimes the tasks are not properly shutdown when it enters power save mode, leading to the CPU to stay in a tight loop and run down your battery.
 
* Copy the <tt>magiclantern.fir</tt> and <tt>magiclantern.cfg</tt> file to the root directory on the CF card
 
* Select "Updated firmware" from the menu
 
* Camera reboots directly into LiveView mode
 
* Press ''Picture Style'' button once LiveView is displayed to bring up the Magic Lantern menu
 
** Use the joystick to move between items.
 
** Click the joystick to select items to toggle them.
 
** Press ''Picture Style'' to exit the menu.
 
* You must reload the firmware after every powersave event or card removal
 
 
{{:Release 0.1.6}}
 
 
{{:Thanks}}
 
 
= Older releases =
 
* [[Release 0.1.5]]
 
* [[Release 0.1.4]]
 
 
Good luck! And don't forget to read the [[FAQ]]
 

Revision as of 03:57, 27 August 2011

THIS IS DANGEROUS AND MIGHT DAMAGE YOUR CAMERA. NO WARRANTIES. NO GUARANTEES. DO NOT TAUNT. IF IT BREAKS, YOU GET TO KEEP BOTH PIECES.

Be careful using this for production work: Please test your camera and the firmware extensively before committing to using it on a set or any "one-take only" events. It has proven fairly stable in use, but there are still some rough edges.

Please review the FAQ. You have questions. It has answers.

5D Mark II

550D / T2i / Kiss X4

60D

600D / T3i / Kiss X5

500D / T1i / Kiss X3

Coming soon:

  • 50D (1.0.8); no public release yet, but available as source code.
  • 1100D/Rebel T3/Kiss X50 (1.0.4)

Good luck! And don't forget to read the FAQ